Community Page


How to Use Fire Extinguisher P  A  S  S

Pull the Pin at the top of the extinguisher. The pin releases a locking mechanism and will allow you to discharge the extinguisher.
Aim at the base of the fire, not the flames. This is important - in order to put out the fire, you must extinguish the fuel.
Squeeze the lever slowly. This will release the extinguishing agent in the extinguisher. If the handle is released, the discharge will stop.
Sweep from side to side. Using a sweeping motion, move the fire extinguisher back and forth until the fire is completely out. Operate the extinguisher from a safe distance, several feet away, and then move towards the fire once it starts to diminish. Be sure to read the instructions on your fire extinguisher - different fire extinguishers recommend operating them from different distances. Remember: Aim at the base of the fire, not at the flames!!!!

A typical fire extinguisher contains 10 seconds of extinguishing power. This could be less if it has already been partially discharged. Always read the instructions that come with the fire extinguisher beforehand and become familiarized with its parts. It is highly recommended by fire prevention experts that you get hands-on training before operating a fire extinguisher. Most local fire departments offer this service. Once the fire is out, don't walk away! Watch the area for a few minutes in case it re-ignites. Recharge the extinguisher immediately after use.


Some useful Community downloads
Teller County Emergency Response Assist Program - Register and have EMS personel in the know
Stroke Facts - Usefull facts on stroke
GMFCPFD Evacuation Plan - Document outlining procedure for a wildland fire in your neighborhood